Infiniti G35 G37 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
50 Posts
That's a ball joint. Also, looking to the left you'll see that you need a tie rod end. You likely need all 6 control arms for the entire front as well as all tie rod ends. I'm going to be honest with you here. Suspension work isn't usually for un-seasoned techs. Especially on this car since you have to remove the insert cones from the old control arms. You need a hydraulic press or a ball joint tool with a 3 pound hammer. There are 4 of them.

I just rebuilt the front end of my G coupe. Good luck.
 
1 - 2 of 2 Posts
Top