Joined
·
1 Posts
If I change over the ecu and wiring harness from a auto g35 into my manual will the non rev up motor work?
Motor swap from rev up to non rev up?
1 - 3 of 3 Posts
Joined
·
1 Posts
You will need to have a NATS delete done, as well as a few other things.
I just swapped a DE into my originally Rev-Up G for my turbo kit, and I had to find a late 2004 6MT ECU to use the wideband that the 03s did not. My tuner (RZG) said that an auto ECU can be tuned to work with a manual transmission, but there's a stumble in 1st. It is definitely possible, and you can just leave the extra cam sensors unplugged since the DE ECU doesn't care about them anyway.
I just swapped a DE into my originally Rev-Up G for my turbo kit, and I had to find a late 2004 6MT ECU to use the wideband that the 03s did not. My tuner (RZG) said that an auto ECU can be tuned to work with a manual transmission, but there's a stumble in 1st. It is definitely possible, and you can just leave the extra cam sensors unplugged since the DE ECU doesn't care about them anyway.
Joined
·
1 Posts
did you figure it out? i’m currently running into the same issue.
1 - 3 of 3 Posts
