[Tall42]

So I went out and bought a new high-beam for passenger side, changed the bulbs only to find out that the new bulb will not come on either. Any tips?

 

[Rob_Austin]

Bulb has been replaced, and won't turn on sounds like a bad ballast.

Sent from my Pixel 3 XL using Tapatalk

 

[n559br]

So I went out and bought a new high-beam for passenger side, changed the bulbs only to find out that the new bulb will not come on either. Any tips?

MAke sure there is voltage to the bulb using a meter. If no voltage them make sure there is voltage to the ballast. If it's there then you need to replace the ballast. If no voltage to it either, then go back to the fuse box and check there. It's just a matter of back tracking.

 

[Scrubber3]

I'm pretty sure the ballast only works the low beam not the high beam unless something loops back around somewhere but doubtful. The high beam is below the low beam if your looking at the light. It's there a way you can snap a picture or DL one with the light that won't work circled? That way I can possibly help.

 

[Josiah94]

I replaced my passenger side headlight on my 2008 infinity g35 and now none of my headlights work. The only lights that work are the fog lights. I checked fuses and they are good. What else could it be and how can I fix it?