This stuff really is awesome.
I know it's difficult to see the shine of a white car, but my friend did her best to capture the glimmer.
I'm very satified with this product, and the best part about it is, it lasts for 4 months!
2004 Clear'd and Creamy Pearl 6MT
Aero and Premium goodness
Graphite's in to get the "lead" out
Forged rims and 1" drop... maybe
Stillen air box and z-tube, but that's it!
Legacy, I used maybe a 1/4 of a bottle.
I did my baby, my friends 10yr old POS honda accord and I have plenty left to take care of my fiancee's next weekend.
Honestly guys, the product does what it says.
2004 Clear'd and Creamy Pearl 6MT
Aero and Premium goodness
Graphite's in to get the "lead" out
Forged rims and 1" drop... maybe
Stillen air box and z-tube, but that's it!
I looked for it in a few stores,(pep boys, autozone, autobacs)but no luck.
I got my bottle from pacific corrosion, they're in Cali.
I believe the url is www.pacificcorrosion.com
If you're looking to pick up a bottle from there, ask for Nancy.
She is so kind. Hopefully she'll give you a guys a break on the price. Tell her Donny from Neo Moto, Inc. sent you. Or if anything, if there are enough people that are interested in this, maybe I can arrange a group buy on a case or something.
2004 Clear'd and Creamy Pearl 6MT
Aero and Premium goodness
Graphite's in to get the "lead" out
Forged rims and 1" drop... maybe
Stillen air box and z-tube, but that's it!
I forgot one smidge of info that I forgot to share with you guys...
Since the car's white, I had a tough time seeing where I applied it and where I didn't apply it. I'm just glad that I don't have to do this again for another 4 months.
2004 Clear'd and Creamy Pearl 6MT
Aero and Premium goodness
Graphite's in to get the "lead" out
Forged rims and 1" drop... maybe
Stillen air box and z-tube, but that's it!
Aww yeah! Sexual Chocolate!
I totally forgot about Xena. Bring her over this weekend.
I have to do Grace's BMW and we'll take care of Xena.
Just a quick note, I hope there aren't any swirl marks on Xena.
From what I read off the site and the bottle, rejex doesn't fill in scratches. But if everything's copacetic, we're good to go.
Holla!
2004 Clear'd and Creamy Pearl 6MT
Aero and Premium goodness
Graphite's in to get the "lead" out
Forged rims and 1" drop... maybe
Stillen air box and z-tube, but that's it!
Aww yeah! Sexual Chocolate!
I totally forgot about Xena. Bring her over this weekend.
I have to do Grace's BMW and we'll take care of Xena.
Just a quick note, I hope there aren't any swirl marks on Xena.
From what I read off the site and the bottle, rejex doesn't fill in scratches. But if everything's copacetic, we're good to go.
Holla!
2004 Clear'd and Creamy Pearl 6MT
Aero and Premium goodness
Graphite's in to get the "lead" out
Forged rims and 1" drop... maybe
Stillen air box and z-tube, but that's it!
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
Damn...lets say that there may be a few minute swirls on my car (alright maybe a lot) what do you suggest (or the bottle suggest) I do b/c i just ordered a bottle[banghead]
They claim it is important that RejeX cures 12 hours in a contamination free environment such as oil, fuel, soot, water, cleaners, etc. before it will cure to it's maximum performance. Did you elect not to drive your car during this period?
See below site for addition info and local distributor's.
Legacy, if you have swirl marks, you may want to try 3m swirl remover or take it to the detailer's concerning the area where the swirl marks are. I believe the rest of the car should be fine.
Hotfoot, I did follow the instructions fully.
This is what I did:
First I went down the block to the gas station to get my cigs. =)
I did this so I wouldn't have to drive it around afterwards.
Anyway, when I got back to the garage, I washed the car with dishsoap.
I did this to strip the BS Meguiar's wax that I had applied.(I only used this because I had no protection on the car)
Dried the car with my beloved absorber.
I had to clay the car because the car had alot of industrial fallout spots and the finished was very gritty to the touch.
After claying it, I washed it again, but this time I used Meguiar's Gold class, I figure it would be much gentler to the car's finish since I had stripped all the previous wax.
Dried it again with my beloved absorber.
So after two consecutive washings, I believe that the car was cool enough, even from my previous jaunt to the gas station.
I applied the rejex bumper to bumper. I applied it on the headlights, sunroof, all windows, rims... basically anything that wasn't rubbery, I put a coat of rejex on it.
After all the labor(of love) I just let the car sit in my garage and the car was ready to be shown off at work. I was out for six weeks, so this just made my return that much more spectacular.
My coworkers were super impressed with the finish.
My one coworker has a black 350 convertible Z. He ordered a bottle yesterday.
I'll post up pics of this ride as soon as he's done.
2004 Clear'd and Creamy Pearl 6MT
Aero and Premium goodness
Graphite's in to get the "lead" out
Forged rims and 1" drop... maybe
Stillen air box and z-tube, but that's it!
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Rejex
Jealous now...
