Quote:
Originally Posted by itsA-Gthang
Hey everyone my check engine light has gone on after i did an oil change. i dont knw if it was the exhuast (greddy tic 3") that i had just put. i also have Z-tube with pop charger and kinetix v+. i did a diagnostic and it says it has a large evap leak. i dnt know where at though. and i checked all the hoses that where relocated on the big sensor that reads the fumes. i also checked the gas cap. so i want to knw if it has to do with my mods and if my computer is just tripping out becuz alot more air is flowing out? do i need to retune my ECU or should i keep looking for the leak?
sry for the long post THANKS!
|
If you've checked all the hoses and connectors thoroughly, and you've made note of the diag code that triggered the CEL, why not go ahead and do a reset on the ECU and see if that clears it up. It's easy enough to do, and if it's a hard fault it will most likely come back again anyway. I'm assuming that a reset was
never done initially after the mods you did?