View Single Post
Old 10-20-2006, 08:06 PM   #1 (permalink)
THX723
Over 1,000 Posts
 
THX723's Avatar
 
Join Date: Oct 2004
Location: Southern CA
Posts: 1,479
Send a message via AIM to THX723
Default Here Zoomer Zoomer Zoomer!

... as a continuation of unintentional thread jacking. As you/we were.


Quote:
chenga 10-20-2006 11:13 AM
I love the squealing I get from my rotors since I don't resurface when switching between the track pads and street pads


THX723 10-20-2006 01:25 PM
Poor Andy!

Ya need a track set of rotors.


superdds 10-20-2006 01:38 PM
^^^how about helping me do all my rotors and pads the next time you're up? i'll pay for airfare!


GZire 10-20-2006 01:40 PM
You need some tools too man. Your normal torture tools don't work on cars.


THX723 10-20-2006 01:41 PM
Sure. Let me know ... I'll have to remember to bring the tools, since you have NONE!


GZire 10-20-2006 01:45 PM
Hey maybe Leon-ardo can give you some tooth cleaning in exchange. He'll fix you up real good. Beware the gas!!!


superdds 10-20-2006 03:32 PM
you'd probably have to check them in huh...


THX723 10-20-2006 03:39 PM
... something about carrying on a 2-foot breaker bar thwarting the TSA.


Zoomzoomers 10-20-2006 04:05 PM
Hey Clint, does this mean that if I show up at your door on a Sat. with a case of beers and some chicken you'll do installs???


THX723 10-20-2006 04:08 PM
If they are New Castle then you're dead on! ... and you wouldn't be the first either.


Zoomzoomers 10-20-2006 04:12 PM
Ok you're on Clint. After I sold my house and moved into a condo I don't have a garage or any of my tools anymore. So I've been searching for a buddy I can take some beer over and do some wrench work. So what area do you live Clint? Now maybe I can get my sways and Kinetix V+ upper plenum to install.

Newcastle did you say??? Ah... A man after my own heart. I'll bring the case from Costco.


THX723 10-20-2006 04:15 PM
I'm in Phillips Ranch right in the area of Pomona/Diamond Bar/Chino Hills.

New Castle makes me happy. : )


Zoomzoomers 10-20-2006 04:18 PM
Nice! I used to live in Diamond Bar. You're on man! As soon as I get the parts together I'm showing up your door. With the Newcastles of course. While we're at it, you can just shoe horn your BBK onto my car.


THX723 10-20-2006 04:38 PM
You're shit'n me! You use to live in DB? Okay, so you should know this neck of the woods well then.

*ties my German Sheperd/Pitbull mutt to the BBK*

So, you're looking to do pad and rotors? What parts are you going with? btw, are you Brembo or no?


Zoomzoomers 10-20-2006 04:40 PM
Well I didn't get to the PR area too much but I do know the Diamond Bar, RH, HH and that general area pretty well. If anything I know the Brea area real well.

I'm thinking of getting the Kinetix V+ upper plenum, Stillen sways and maybe an HKS exhaust, but I reallly can't say for sure. I've had a reoccurrance of an old bad habbit. So I need to rein in my spending, especially with X-mas coming up.


superdds 10-20-2006 04:44 PM
^^^would this habit involve time pieces?


THX723 10-20-2006 04:46 PM
No worries. Philips Ranch is very tiny. You'd drive though it in less than 1 minute.

Wow, finally the modding begins with you! Why don't you go with the spacer instead of the Kinetix?

I too know Brea extremely well. I grew up in Placentia.


THX723 10-20-2006 04:49 PM
... I just realized we're not in the OFF TOPIC section and totally thread jacked B1GS. Sorry mate!

Zoom, we should take this else where out of respect, ya?


Zoomzoomers 10-20-2006 04:50 PM
Dunno for some reason I like the Kinetix V+ much better than the spacer, but maybe I'm wrong.


Zoomzoomers 10-20-2006 04:50 PM
Sure. You want to start the thread?

And yes Super, that's it!
__________________
-Clint
THX723 is offline   Reply With Quote
Sponsored Links
Advertisement